Cari Kerja:
contoh: marketing manager atau administrasi jakarta

Various Engineering Vacancy - Brunei Based. PART III.

Perusahaan: job vacancy
Tanggal Posting: 16 Jan 2012

PART III. One of the biggest engineering companies in Brunei is looking
for qualified and experienced candidates for below categories:



21. Control Valve Technicians

Control Valve Technician will:

1. have experience - at least ten (10) years, in the overhaul,
setting and testing of all types of control valves, including but not
limited to FISHER, MASONEILAN AND BETTIS control valves and actuators.
He must have relevant experience and ability in the testing procedures,
stroke adjustment and repair;
2. have BTEC or City and Guild Certificate in Mechanical Engineering
(desirable but not
3. have industrial work experience on relevant types of control
valves in overhaul and testing for a minimum of 4 years;
4. be fluent in spoken and written English;
5. preferably be capable of working with spare parts and maintenance
history system;
6. be capable of motivating and directing small teams of 2-4 fitter
mechanics;

22. Safety Relief Valve Technicians

Safety Relief Valve Technician will:

1. be experienced - at least ten (10) years, in the overhaul, setting
and testing of all types of Safety Relief Valves, including but not
limited to CROSBY, FUKUI, DRESSER, ANDERSON & GREENWOOD. He must have
relevant experience and ability in repair and testing of Safety Relief
Valves. He should be capable of working with inspectors and maintaining
simple repair records systems. He should understand the principle of
operation of Safety Relief Valves;
2. have BTEC or City and Guild Certificate in Mechanical Engineering
(desirable but not essential);
3. have industrial work experience on relevant types of safety relief
valves in overhaul and testing for a minimum of 4 years;
4. be fluent in spoken and written English;
5. preferably be capable of handling records systems;
6. be capable of motivating and directing small teams of 2-4 fitter
mechanics.

23. Rotating Equipment Technicians

Rotating Equipment Technician will:

1. have obtained National Certificate (BTEC) or equivalent City and
Guilds Certificate in Mechanical Engineering Practices;
2. be capable of overhauling rotating equipment such as centrifugal
and reciprocating pumps, steam turbines, gear boxes and reciprocating
compressors (including their piping system and structural support);
3. be able to interpret drawings and manuals and have a good
understanding of the functioning of each part of the equipment.
4. be able to diagnose and correct intricate problems in
turbine/compressor lube-, control- and seal oil systems and other
hydraulic systems.
5. be capable of selecting and using the correct tools, alignment
equipment and materials;
6. have good knowledge of industrial safety procedures;
7. have a minimum of six (6) years practical experience in
overhauling rotating equipment;
8. be able to communicate in spoken and written English.

24. Riggers

Riggers will:

1. have the full range of skills applicable to their trade in the Oil
and Gas Industry including, but not limited to being skilled in the
sizing and fixing of slings, chain blocks etc., giving clear control
instructions to crane operators and in the erection of steelwork
2. have a minimum of four (4) years suitable practical experience in
oil refinery, gas, power or petro-chemical plant
3. have a working knowledge of the applicable standards and the use
and handling of:

- wire ropes/slings to BS1290, BS3317 and BS3481

- pulley blocks to BS3243

- shackles to BS3032

- chain hoists to BS4898

25. Mechanical Fitters

Mechanical Fitters will:

1. have the full range of skills applicable to their trade in the Oil
and Gas Industry including, but not limited to, being skilled in the
repair and maintenance of refinery process and power plant, pumps,
compressors, steam turbines, fans, hydraulic equipment and system etc.,
in the overhaul of valves (including safety relief and control valves)
and of other mechanical equipment e.g. exchangers, columns, vessels and
tanks, and in the alignment of running equipment;
2. have a minimum of five (5) years suitable practical experience in
oil refinery, gas, power or petro-chemical plant;
3. have a working knowledge of the English language.

26. Machinists

Machinists will:

1. be able to work from drawings to produce parts, or make repairs to
stationary and rotating equipment to a high level of accuracy and
quality;
2. be able to set up and operate any machine tool, including lathes,
boring, milling, lapping, grinding, shaping and balancing machines;
3. have a minimum of ten (10) years experience as a Machinist;
4. have a sound knowledge and a familiarity with engineering drawings
and sketches, as well as being fully conversant in English.

27. Insulation Supervisors

1. The Insulation Supervisor shall have received education up to Form
5 level and shall be able to speak, read and write in the English
language. He shall have a proven record as a supervisor in Thermal and
Cryogenic Insulation, the application of vapour barriers and Glass fibre
Reinforced Epoxy, the mixing of chemicals for the formulation of
Polyurethane Foam and the maintenance/installation of refractory bricks
or mortar work and sheet metal work for at least Five (5) years. He
shall be able to demonstrate his competence by passing a competence or
trade test if so required by the COMPANY.
2. He should have knowledge of the latest revision of the CINI
guideline and know how to apply the guideline for hot and cold
insulation.
3. He shall be able to take measurements and be familiar with sheet
metal equipment and make sketches for the fabrication of sheet metal
work as well as being capable of installing the finished work
4. He must be capable of exercising firm control over his
subordinates and must meet the stringent standards (QA/QC) required for
insulation work.
5. He shall be well experienced in the operation and general
maintenance of mechanical agitators and foaming machines, and in quality
control procedures.

28. Insulators/Fabricators

1. The Insulators/Fabricators shall have received education up to
Form 3 level and be able to speak, read and write in the English/Malay
languages.
2. They shall have received a formal training or apprenticeship in
their craft and shall be skilled in Sheet Metal Fabrication, the
installation and repair of Thermal and Cryogenic Insulation, the
application of vapour barriers and Glass fibre Reinforced Epoxy, the
mixing of chemicals for the formulation of Polyurethane Foam and the
maintenance/installation of refractory bricks or mortar work.
3. They shall be skilled in the installation/repair of sheet metal
work. They shall be thoroughly familiar with all other work related to
Thermal and Cryogenic Insulation and refractory/bricks repair work.
4. They shall have received a formal training or apprenticeship in
the sheet metal work craft, from a recognised Trade School. They shall
have at least five (5) years experience in the formation of various
types of Aluminium and sheet metal or S.S. boxes, sleeves, elbows,
"T
"
junctions cladding for pipe line and equipment. They shall be able to
take accurate site measurements for the fabrication of various types of
forms and/or sleeves.

29. Diesel Engine Operators

Diesel Engine Technician will:

1. Have BTEC or City & Guild Certificate in Mechanical Engineering
(desirable but not essential).
2. Be able to service and overhaul diesel engines such as
compressors, pumps, generators, etc.
3. Be capable of using the correct tools and equipment.
4. Have good knowledge of industrial safety procedures.
5. Have a minimum of four (4) years practical experience.
6. Be able to communicate in spoken and written English.

30. Painters

Fully experienced in painting preparation and protection of steel
surfaces techniques using hand and mechanical EQUIPMENT by either brush,
or rollers and painting to the respective standard operations contained
in COMPANY
'S Painting/Coating Application guide and Specifications
ES-48.00 and Module 32, and be familiar with the safety requirements of
painting.

Interested applicants are invited to submit detailed resume (CV) stating
educational and experience certificates in English not latest by January
19, 2012 to the following e-mail address:
> > in MS
Word not more than 300kb.



Please write
"Your position -Brunei
" on your email subject and
application title.



Application with PDF or other format and exceeding more than 300KB will
not be considered.



We are sorry, only shortlist candidates will be notified.



For more info
's, please call us or click
http://www.totaldata.co.id/jobsite_brunei.htm
http://www.totaldata.co.id/jobsite_brunei.htm



PT. Totaldata Persada

Jln. Raya Jatikramat No. 8 Jatimakmur Pondok Gede Bekasi 17421

Telp. 021-8477689, 021-84994728. Attn.: Ms.Silvy.


Thanks Mr. Admin.

Kategori Lowongan